WilloBuild

    UNOFFICIAL OPENVIX FOR ZGEMMA RECEIVERS

    Please note that these builds are based on OpenViX and no support is offered by the OpenViX Team for Zgemma receivers.

    Any problems email me at the below address:

    DO NOT POST IN THE OPENVIX FORUM WITH QUESTIONS ABOUT THIS BUILD OR ZGEMMA RECEIVERS

    OpenViX 5.1  series with KiddaC's Slyk1-HD , V-skin red and Slyk-Q skins.

    WILLOBUILD IS NOW INSTALLED ONLINE RATHER THAN FLASHING BY USB

    YOUR BOX MUST HAVE A NETWORK CONNECTION AND YOUR STORAGE DRIVE SHOULD BE PLUGGED IN. (PREFERABLY FORMATTED AS EXT4 AND MOUNTED AS /MEDIA/HDD).

    CONNECT TO YOUR BOX USING PUTTY – ENTER IP ADDRESS OF BOX AND LOGIN WITH ROOT.

    COPY THE CODE BENEATH YOUR BOX NAME AND PASTE BY RIGHT CLICKING IN THE PUTTY TERMINAL WINDOW AND PRESS ENTER     

    Zgemma H.2S  (5.1.033)

    wget --no-check-certificate -O install_h2s.sh http://www.willobuild.xyz/Scripts/install_h2s.sh && bash install_h2s.sh

    Zgemma H.2H  (5.1.033)

    wget --no-check-certificate -O install_h2h.sh http://www.willobuild.xyz/Scripts/install_h2h.sh && bash install_h2h.sh

    Zgemma H3.2TC  (5.1.033)

    wget --no-check-certificate -O install_h32tc.sh http://www.willobuild.xyz/Scripts/install_h32tc.sh && bash install_h32tc.sh

    Zgemma H5.2TC  (5.1.033)                          (WILL WORK ON ANY H5)

    wget --no-check-certificate -O install_h52tc.sh http://www.willobuild.xyz/Scripts/install_h52tc.sh && bash install_h52tc.sh

    Zgemma H7 (S & C) (5.2.018)

    wget --no-check-certificate -O install_vix_h7.sh http://www.willobuild.xyz/Scripts/install_vix_h7.sh && bash install_vix_h7.sh

    AFTER THE BOX HAS REBOOTED, BLUE BUTTON > VIX > SCRIPT RUNNER AND RUN THE RESTORE BACKUPS SCRIPT.
    THIS WILL RESTORE YOUR LINES AND AUTOTIMERS THAT THE SCRIPT SAVED BEFORE FLASHING.

    INSTRUCTIONS FOR SETTING UP TUNERS AND AUTOBOUQUETSMAKER

    If you like my stuff and would like to buy me a pint through PayPal it would be very much appreciated - willobuild@gmail.com

                                         Thanks to KiddaC for his amazing skins

    gallery/resources-Thanks
    Flashing any firmware to your receiver carries an inherent risk. (i.e. loss of power during the flashing process may cause your receiver not to boot).
    The use of WilloBuild is at your own discretion and risk and with agreement that you will be solely responsible for any damage to your Enigma2 receiver or loss of data that results from such use.

    Make a free website with